成品效果，截图的时候HDC1080 没接，实质使用是可以获取到的。

这是一篇水文x，忘记发了的。

MCU: Air32F103CBT6

实现代码

thermocouple.cpp

#include "thermocouple.h"

// V1.9.2 后从每个传感器使用单独的SPI变成共用SPI2

#define SPI2_SCK PB13
#define SPI2_MISO PB14

#define TEMP0CS PB12
#define TEMP1CS PB15
#define TEMP2CS PA8

#define HDC1080_ADDRESS 0x40

MAX6675 thermocouple0(SPI2_SCK, TEMP0CS, SPI2_MISO);
MAX6675 thermocouple1(SPI2_SCK, TEMP1CS, SPI2_MISO);
MAX6675 thermocouple2(SPI2_SCK, TEMP2CS, SPI2_MISO);

void readHDC1080(TwoWire& wire,float* temperature, float* humidity) {
  uint8_t data[4];
  uint16_t rawTemperature, rawHumidity;

  // 发送读取温湿度数据的命令
  wire.beginTransmission(HDC1080_ADDRESS);
  wire.write(0x00); // 温度和湿度寄存器的起始地址
  wire.endTransmission();

  // 延时一段时间，等待传感器完成测量
  delay(20);

  // 读取温湿度数据
  wire.requestFrom(HDC1080_ADDRESS, 4);
  for (int i = 0; i < 4; i++) {
    data[i] = wire.read();
  }

  // 将读取到的数据进行解析
  rawTemperature = (data[0] << 8) | data[1];
  rawHumidity = (data[2] << 8) | data[3];

  // 计算温度和湿度的实际值
  *temperature = (float)rawTemperature / 65536 * 165 - 40;
  *humidity = (float)rawHumidity / 65536 * 100;
}

thermocouple.h

#ifndef THERMOCOUPLE_H
#define THERMOCOUPLE_H

#include <max6675.h>
#include <Wire.h>



extern MAX6675 thermocouple0;
extern MAX6675 thermocouple1;
extern MAX6675 thermocouple2;

platformio.ini

这里使用的是通用的STM32的，记得装库x。

[env:genericSTM32F103CB]
platform = ststm32
board = genericSTM32F103CB
framework = arduino
upload_protocol = cmsis-dap
lib_deps = 
	adafruit/MAX6675 library@^1.1.0

main.cpp

#include <Arduino.h>
#include <Wire.h>
#include <vector>
#include "serial_utils.h"
#include "wire_utils.h"
#include "thermocouple.h"
#include "helpers.h"

#define LED1 PC13
void setup() {
  initSerial();
  initWire();
}

void loop() {    
  //GET ENV temperature, humidity
  float temperature, humidity;
  readHDC1080(Wire2,&temperature, &humidity);

  //sensor temperature & env temperature
  std::vector<float> numbers = {
    thermocouple0.readCelsius(),
    thermocouple1.readCelsius(), 
    thermocouple2.readCelsius(), 
    temperature, 
    humidity,
    //Addons
  };

  //printout
  const size_t bufferSize = 128;
  char formattedString[bufferSize];
  formatFloats(numbers, formattedString, bufferSize);

  std::string message = "DATA,";
  message += formattedString;
  Seriral1.println(message.c_str());
}